|
|
Lathe
Tooling
|
||
|
Item
|
Description
|
Price
|
| Turret Tools | Large selection of turret lathe tooling. Bolt on and straight shank tooling. Boring bar holders, tool posts, collet pads, collet noses, box tools, hollow mills, more! | call |
| Thread Mount Faceplates | Threaded mount faceplates. Most about 8". Also a few backplates and spindle caps | $50 |
| Small Turret Tooling | Small shank turret tooling (5/8, 3/4) Hollow mills, box tools, tap heads, etc | call |
| Toolposts | Toolposts from 15" actual swing lathe | call |
| Monarch Tubes | Pair of 3C23 tubes for Monarch EE | $75 |
|
Mill
Tooling
|
||
|
Item
|
Description
|
Price
|
| Troyke Rotary | 30" rotary table with approx. 18" through hole. Has built in encoder | $1200 |
| Hardinge 5C Indexers | Various models of 5C capacity Hardinge indexers | call |
| Helicoil Inserter | Helicoil drill press insertion tool | $75 |
| 40 NMTB Tooling | Endmill holders, collet holders, arbors, etc | call |
| 50 NMTB | 50-40 adaptor, Endmill holders, collet holders, arbors, etc | call |
| Indexible Facemills | Assorted indexable facemills. Mostly large, 10-12" range | $200 |
| DA Collet Holder | MT3 shank DA collet holder with collets | $75 |
| Erickson Holder | Erickson 40nmtb collet holder. | $75 |
| 100TG Collets | Spring Collets 100TG. Approx size, .562, .687, .375, .437, .875, .812, .75, .625, 1" | $65 |
| 5C Spin Indexer | 24 position 5c spin indexer | $20 |
| L-W Dividing Head + | L-W 6" center height dividing head. With tailstock, center, 3 plates | $325 |
| L-W Dividing Head | L-W 6" center height dividing head. | $150 |
| Hartford Plates | Masking plates for Hartford indexing chuck. Many patterns to choose from | $15.00 ea |
| Adcock Shipley | Outboard support for Adcock Shipley EA | $175 |
| Cincinatti Outboard | Outboard for Cincinnati mill, believe one of the automatic production units | $100 |
| Cincinatti Outboard Large | Outboard for Cincinnati mill, believe about a #4 | $125 |
| Yuasa 5C indexer | Yuasa 5C collet indexer with tailstock | $250 |
| Nichols Parts | Overarm and outboard support for Nichols Mill | $175 |
| Boring Head | Chandler Mod 1 1/2 boring and facing head with 1.5" shank | $200 |
| Boring Head | Criterion DBL-204 | $85 |
| Boring Head | Maxwell 1" shank boring head | $40 |
| Deburing Tool | Intramatic no bur | $65 |
| Mill Arbor | R8 shank horizontal milling arbor for right angle head | $125 |
| Boring and Facing Heads | Several other makes of boring heads, Chandler ,Narex, Diamond, Enco, Universal | Call |
| Bridgeport RT | Bridgeport rotary table 12" | $275 |
| Bridgeport RT | Bridgeport rotary table 14" | $375 |
|
Machine
Parts
|
||
|
Item
|
Description
|
Price
|
| Delta Drill Press | Parts from Delta drill pess, #2 MT | call |
| K&T Parts | Assorted parts for K&T #2 horizontal mill. WWII vintage | call |
| Clausing Parts | Parts from 13 and 14" Clausing lathes. Bed turret, screws, etc.( NO STEADY, FOLLOW) | call |
| Misc Parts | Misc take offs from junk machines, steady rests, followers, compounds, gears, handles, covers, etc. | call |
|
Weldi
ng
Odds & Ends
|
||
|
Item
|
Description
|
Price
|
| Mig Wire Feeders | Hobart mig welder wire feeders, 3 to choose from | $125 |
| Oxy-fuel Torches | Lot of oxyacetylene torches and gauges | $100 |
| More Mig Feeders | Various makes mig wire feeders | call |
| Tig Coolers | Various makes Tig welder radiators | call |
| Plastic Welder | Japanese ultrasonic plastic welder | $50 |
| Rototec Flame Spray Unit | Rototec (Metco) Flame spray unit with powders. Model I | $400 |
|
Grinding
& Sharpening
|
||
|
Item
|
Description
|
Price
|
| Weldon Air Bearing | Weldon Air bearing fixture. Spindle and many bushings. VGC with paperwork and original case etc. | $700 |
| Vise | Rockwell Univise | call |
| Mag Chuck | Compound sine magnetic chuck | $300 |
| Eldorado | Eldorado gun drill sharpening fixture | call |
| KO Lee Work Head | 50 taper KO Lee workhead | $300 |
|
Measuring
Tools
|
||
|
Item
|
Description
|
Price
|
| Federal Indicator | Federal indicator stand. Has .0001" indicator and huge micrometer head for precise comparisons | $175 |
| Micrometers | Assorted make micrometers to 12" capacity | call |
| Starrett 724 Mike | 12-18" capacity Starrett interchangeable anvile mike. In case with anvils and standards, missing 1 standard | $250 |
| Starrett 224 Mike | 20-24" capacity Starrett interchangeable anvile mike. In poor case with 4 anvils and 3 standards | $225 |
| B&S Mike | about 7-12" capacity B+S interchangeable anvile mike. Bad head, , 6 anvils and no standards | $45 |
| Starrett Caliper | Starrett 123 38" caliper | $350 |
| Indicator Stand | B+S 584 Hite Chek | $35 |
| Measuring Rods | Lufkin Micrometer rods. 2 mike heads and assorted rods. Length checkers? | $115 |
| Snap Gauges | Assorted snap gauges | $25 |
| Gauges | Assorted internal plug and go-no go gauges | $20 |
|
Die
Heads, Tap Heads and Related Threading and Sharpening
|
||
|
Item
|
Description
|
Price
|
| Fixture | J+L Chaser grinding fixture | $125 |
| Fixture | J+L micrometer fixture for chaser grinding (pair) | $100 |
| Die Head | Geometric 5/16DSA | $100 |
| Die Head | Geometric 9/16? | $125 |
| Die Head | H+G #0 3/4" shank | $75 |
| Die Head | H+G #1 DM 3/4" shank | $125 |
| Die Head | Rubometric D 9/16 with Hardinge AHC 21 holder | $100 |
| Die Head | J+L (Jones and Lamson) 21S 1.5" shank | $125 |
| Die Head | J+L (Jones and Lamson) 22S/23S 1.5" shank | $175 |
| Die Head | Geometric colapsing taps, several, price each | $50 |
| Tap Head |
Tapmatic U3 | $200 |
| Procunier #4 | Procunier #4 with many collets and wrenches | $350 |
| Tap Head | Procunier E tap heads, need work | $20 |
| Tap Collets | Procunier tap collets, 3/4 and 3/8 OD | Call |
| Tap Head | Telco Jarvis spindle mount tap head. #10 capacity. Weak clutch | $20 |
| Thread Roll | Landis thread roll. 2" shank. Extra rolls. 7 1/8 OD head | $200 |
|
Mill
& Bench Vises
|
||
|
Item
|
Description
|
Price
|
| Mill Vise | Kurt 6" vise | $225 |
| Mill Vise | Kurt DL400C | $450 |
| Elseworks Vise | Elseworks classic 4" vise. Has manual hydraulic clamping. Sold by Dapra over $2K new | $400 |
| Bench Vises | Assorted bench vises | call |
| Mill Vise | Kurt 4" wide vise. Actually a Kurt II, machined on all sides. Missing jaws and has 2 large marks in bed | $175 |
| Mill Vises | Various mill vises | call |
| Planer Vise | Large Planer vise | $200 |
|
Lathe
Chucks, Face Plates & Collet Chucks
|
||
|
Item
|
Description
|
Price
|
| Collet Chuck | Jacobs L1 mount rubberflex collet chuck with collets | $300 |
| Collet Chuck | Levermatic collet chuck. Has collets but cant get nose off to verify if same L-O mount | $150 |
| Top Jaws | Bullard Top Jaws from 36"? machine | $199 |
| Faceplate | L-1 mount facplate | $150 |
| Faceplate | D-6 Faceplate, several sizes | call |
| Thread Mount Faceplates | Various threaded faceplates | call |
| Driveplate | L-1 mount drive plate | $65 |
| Lathe Chuck | Various lathe chucks. Mostly L-1, D-6, and plain back, few threaded. 2,3,4,and 6 jaw | call |
| Jaws | Assortment of top and master jaws | call |
| 3 Jaw Chuck | Yuasa 2 1/4-8 chuck (3 jaw) Adjust tru style | $175 |
| 2 Jaw Chuck | Rohm 2 jaw lathe chuck. Flat back. About 6" | $150 |
| Faceplate | 20" D1-6 faceplate | $200 |
| Faceplate | 14.5" D1-6 faceplate | $150 |
| Faceplate | 14" D1-6 faceplate | $150 |
| Lathe Chuck | 10" OD 3 jaw. Lightly built great for small lathe or fixture | $40 |
| Lathe Chuck | 12" 3 jaw chuck. Flat back | $125 |
| Lathe Chuck | L-1 mount 4 jaw chuck, several | call |
| Lathe Chuck | 4 jaw scroll chuck, several | call |
| Drill Chuck | Jacobs #36 drill chuck | $75 |
| Drill Chuck | Assorted drill chucks | call |
|
Taper
Attachments
|
||
|
Item
|
Description
|
Price
|
| Tailstock | Clausing 5900 5914 tailstock | $200 |
| Turret | Clausing 6300 bed turret, part # 7717 Clausing atlas | $375 |
| Turret | Unknown make bed turret, about a 13" lathe | $150 |
| Parts | Clausing 63 series parts, headstock, carriage parts | call |
| Parts | Clausing 59 series parts, leadscrew, carriage, headstock, bed, motor | call |
| Slide | Hardinge cross slide, top of slide only from DV-59 | $100 |
| Follow Rest Sidney | Sidney follow rest. | $200 |
| Tos SUS 80 Steady and Follow Rests | Tos SUS 80 follow rest and shop made steady rest | $600 |
| Hardinge Radius | Hardinge model C Radius attachment for late model HLV. VG to excellent condition | $1000 |
| Summit Steady | Follow rest from Summit lathe, 12" hole, 10" from way straight up to center. 17" from bolt to bolt | $250 |
| Medium Steady | 7" from flat straight up to center of hole, 7" from center of v to outside edge of flat | $100 |
| Large Follow Rest | 12.5" from center of hole to center of top row of mounting bolts | $125 |
| Follow Rest | Bolt down follow rest. Has 4 holes to bolt to carriage. | $100 |
| Taper Parts | Taper attachment parts. Slide from Clausing? Other parts unknown | call |
| Hardinge D | Hardinge model D taper slide | $225 |
|
Screw
Machine & Turret Lathe Tooling
|
||
| Item | Description | Price |
| Flanges | Bolt on turret flanges for W+S lathes. 3 total | $35 |
| Knurl | Somma KT00 knurl | $100 |
| Turret Tools | Boyar Schultz ORT | $75 |
| Turret Tools | Boyar Schultz OAT | $100 |
| Turret Tools | Somma TH1 | $100 |
| Holllow Mill | Kutmore 3H | $75 |
| Screw Machine Tools | Asstd feed fingers | $20 |
| Screw Machine Tools | 7 #11 collets | $40 |
| Screw Machine Tools | 15 B16 pads | $40 |
| Screw Machine Tools | 16 #22 collets | $120 |
| Screw Machine Tools | 22 S12 collet pads | $50 |
| Screw Machine Tools | 7 22C collets | $40 |
| Screw Machine Tools | 24 B7 pads | $65 |
| Screw Machine Tools | 1" NB collets (3 total) take S10 pads | $35 |
| Clausing Tailstock | Clausing 5914 tailstock. Needs work | $150 |
| W+S Box Tool | M4466 box tool, several | $50 each |
| Shank Tools | Large selection of 3/4 and 1" round shank tooling | Call |
| Small Shank Tools | 1/2 and 5/8 round shank tooling | call |
| 1" Shank Box Tool | 1" Shank box tool, made by Watson. Have more tooling in this size range. | $40 |
|
Miscellaneous
|
||
|
Item
|
Description
|
Price
|
| Oil Pump | Forced lube oil pump. New. Originaly used for CNC gearboxes | $125 |
| Unipunch Tooling | Two Unipunch frames | call |
| Tool Balancer | Aero Motive tool balancer (several available) | $50 |
| Auto Shank Tooling | Lot of automotive shank tooling | $50 |
| Narex Boring Facing Head | Narex boring and facing head with some extensions. MT6 shank | $999 |
| Collets! | R8, 5C, Procunier tap, Acorn "U", Balas, more | call |
| #3 Magic Chuck | Mt3 shank magic chuck with holders. Currently fitted with MT4 sleeve | $100 |
| Amp Terminal Press | Amp press for crimping terminals to the end of wires | $100 |
| Cincinnati Steady | Steady rest for Cincinnati 12" ID/OD grinder | $175 |
| Darex Fixture | Darex Drill sharpening fixture | $200 |
| Power Head | Ridgid 65 die head with Toledo power unit. | $100 |
| Notcher | Unipunch style corner notching unit | $250 |
| Heidenhain Scales | Heidenhain DRO scales new and refurbished, call for sizes and pinouts | $175 each |
| Doall Band Files | Doall band file blades | $45 each |
| Machine Manuals | Stock of machine manuals for sale or trade | Call |
| VFD | Variable frequency drives, large stock of VFd's, assorted Hp mostly 400-460V | Call |
| Vertical Hone Parts | Vertical honing mandrel with MT shank | $100 |
| OD Grinder Steadies | Steady rests for norton and cincinnati grinders | Call |
| Quick Change | Several sets magic chucks (quick change tools) and holders | call |
| Punches | Unitool 4M1 1/4 punch frames (2) | $40 |
| Scale | Acurite DRO Scale, new in box | $125 |
| Punches | Large stock of punches and dies for sheetmetal work, various sizes | call |